Version Compatibility

Reference examples tested with: matplotlib 3.8+, numpy 1.26+, picard 3.1+, pysam 0.22+, samtools 1.19+

Before using code patterns, verify installed versions match. If versions differ:

• Python: pip show <package> then help(module.function) to check signatures
• CLI: <tool> --version then <tool> --help to confirm flags

If code throws ImportError, AttributeError, or TypeError, introspect the installed package and adapt the example to match the actual API rather than retrying.

Alignment Validation

Post-alignment quality control to verify alignment quality and identify issues.

"Check alignment quality" -> Compute post-alignment QC metrics (mapping rate, pairing, insert size, strand balance) to identify issues before downstream analysis.

• CLI: samtools flagstat, samtools stats, Picard CollectAlignmentSummaryMetrics
• Python: pysam.AlignmentFile iteration with metric calculations

Two Different Validations

A file can pass quickcheck and still be malformed in ways that crash GATK three hours into HaplotypeCaller. Conversely, a QC-poor BAM can be structurally valid.

File Integrity

# Fast: header + EOF block check (misses mid-file truncation, invalid CIGAR)
samtools quickcheck -v in.bam || echo "QUICKCHECK FAILED"
samtools quickcheck -v *.bam > bad_bams.fofn   # one fail-line per bad file

# Slow but thorough: structural validation
picard ValidateSamFile I=in.bam MODE=SUMMARY R=ref.fa

# Production: ignore expected-but-noisy
picard ValidateSamFile I=in.bam MODE=SUMMARY R=ref.fa \
    IGNORE=INVALID_MAPPING_QUALITY \
    IGNORE=MISMATCH_FLAG_MATE_NEG_STRAND

CI-safe one-liner:

test -s in.bam \
  && samtools quickcheck -v in.bam \
  && [ $(samtools view -c -F 2304 in.bam) -gt 1000 ] \
  || { echo "BAM failed integrity"; exit 1; }

Sequence Dictionary Cross-Validation (M5)

# Compare per-contig MD5 between BAM and reference
diff \
    <(samtools view -H in.bam | grep '^@SQ' | tr '\t' '\n' | grep '^M5:' | sort) \
    <(samtools dict ref.fa | grep '^@SQ' | tr '\t' '\n' | grep '^M5:' | sort)

If M5s differ, the BAM was aligned to a different sequence than the current reference (even if contig names match). Concrete failure modes: GRCh38 vs GRCh38.p13 vs GRCh38noalt (alt contigs differ); UCSC chr1 vs Ensembl 1 (names differ, M5s match -- pure renaming); soft-masked vs unmasked (M5 matches -- case is normalized to uppercase before hashing, so lowercase soft-masking is invisible to M5). Note hard-masking is different: it replaces bases with N, changing the sequence, so its M5 does NOT match the unmasked reference. The M5 tag is the only definitive identity check.

Contamination and Sample Swap

No alignment QC is complete without these in production:

# Cross-sample contamination
verifybamid2 --SVDPrefix /resources/1000g.b38.vcf.gz.SVD \
    --Reference ref.fa --BamFile sample.bam --Output sample.contam
# FREEMIX > 0.03 is the commonly used contamination-concern threshold; values escalate from there.

# Relatedness, sex check, sample swap detection
somalier extract -d extracted/ -s /resources/sites.GRCh38.vcf.gz \
    -f ref.fa sample.bam
somalier relate --infer extracted/*.somalier

# Tumor/normal pairing verification
picard CrosscheckFingerprints I=tumor.bam I=normal.bam \
    HAPLOTYPE_MAP=Homo_sapiens_assembly38.haplotype_database.txt
# LOD > 5 = same individual; < -5 = different

Sample-swap rates of 0.5-1% in production cohorts are typical. Without somalier or CrosscheckFingerprints, swaps are detected only when a downstream finding contradicts clinical expectation.

Insert Size Distribution

Goal: Verify that the fragment length distribution matches the library preparation protocol.

Approach: Extract template_length from properly paired reads and compare the distribution to expected values for the library type.

samtools stats

samtools stats input.bam > stats.txt
grep "^IS" stats.txt | cut -f2,3 > insert_sizes.txt

Picard CollectInsertSizeMetrics

java -jar picard.jar CollectInsertSizeMetrics \
    I=input.bam \
    O=insert_metrics.txt \
    H=insert_histogram.pdf

Expected Insert Sizes by Library

For ATAC, the multimodal pattern is the QC. If the mononucleosomal peak (~180 bp) is absent, Tn5 was over-titrated, under-titrated, or DNA was degraded. Use ATACseqQC fragSizeDist() for the standard ATAC fragment-size diagnostic.

Python Insert Size Analysis

import pysam
import numpy as np
import matplotlib.pyplot as plt

def get_insert_sizes(bam_file, max_reads=100000):
    sizes = []
    bam = pysam.AlignmentFile(bam_file, 'rb')
    for i, read in enumerate(bam.fetch()):
        if i >= max_reads:
            break
        if read.is_proper_pair and not read.is_secondary and read.template_length > 0:
            sizes.append(read.template_length)
    bam.close()
    return sizes

sizes = get_insert_sizes('sample.bam')
print(f'Median insert size: {np.median(sizes):.0f}')
print(f'Mean insert size: {np.mean(sizes):.0f}')
print(f'Std dev: {np.std(sizes):.0f}')

plt.hist(sizes, bins=100, range=(0, 1000))
plt.xlabel('Insert Size')
plt.ylabel('Count')
plt.savefig('insert_size_dist.pdf')

Proper Pairing Rate

Percentage of reads correctly paired.

samtools flagstat

samtools flagstat input.bam

samtools flagstat input.bam | grep "properly paired"

Calculate Pairing Rate

proper=$(samtools view -c -f 2 input.bam)
mapped=$(samtools view -c -F 4 input.bam)
rate=$(echo "scale=4; $proper / $mapped * 100" | bc)
echo "Proper pairing rate: ${rate}%"

Expected Rates

GC Bias

GC content correlation with coverage.

Picard CollectGcBiasMetrics

java -jar picard.jar CollectGcBiasMetrics \
    I=input.bam \
    O=gc_bias_metrics.txt \
    CHART=gc_bias_chart.pdf \
    S=gc_summary.txt \
    R=reference.fa

deepTools computeGCBias

computeGCBias \
    -b input.bam \
    --effectiveGenomeSize 2913022398 \
    -g hg38.2bit \
    -o gc_bias.txt \
    --biasPlot gc_bias.pdf

Interpret GC Bias

Strand Balance

A balanced 0.48-0.52 forward/reverse ratio applies to WGS / WES / generic DNA-seq on autosomes. Expected to deviate for: stranded RNA-seq (deliberately strand-asymmetric -- verify with RSeQC infer_experiment.py), bisulfite (CT vs GA), small-RNA / strand-specific RNA-seq, and chrY/chrM regions. Per-chromosome strand imbalance >5% on autosomes is a field-convention rule of thumb (no single primary citation) — it picks up aligner artifacts; on chrX/chrY it suggests sex-mismatch.

Calculate Strand Ratio

forward=$(samtools view -c -F 16 input.bam)
reverse=$(samtools view -c -f 16 input.bam)
echo "Forward: $forward"
echo "Reverse: $reverse"
ratio=$(echo "scale=4; $forward / $reverse" | bc)
echo "F/R ratio: $ratio"

Check Strand Bias per Chromosome

for chr in chr1 chr2 chr3; do
    fwd=$(samtools view -c -F 16 input.bam $chr)
    rev=$(samtools view -c -f 16 input.bam $chr)
    echo "$chr: F=$fwd R=$rev ratio=$(echo "scale=2; $fwd/$rev" | bc)"
done

Mapping Quality Distribution

Extract MAPQ Distribution

samtools view input.bam | cut -f5 | sort -n | uniq -c | sort -k2 -n

Calculate Mean MAPQ

samtools view input.bam | awk '{sum+=$5; count++} END {print "Mean MAPQ:", sum/count}'

MAPQ Distribution Is Bimodal and Aligner-Specific

Mean MAPQ is misleading; distributions are bimodal (0 and aligner-max). For aligner-specific scales and "unique mapping" sentinels, see sam-bam-basics. The fraction of primary mapped reads at MAPQ >= 30 is a more informative summary than the mean.

Chromosome Coverage Balance

Calculate Per-Chromosome Coverage

samtools idxstats input.bam | awk '{print $1, $3/$2}' | head -25

Check for Aneuploidy / Sex Chromosome Imbalance

Median-normalized per-autosome coverage (1.0 = expected diploid; 0.5 = monosomy/sex; 1.5 = trisomy):

samtools idxstats in.bam | awk '$2>0 && $1!~/^chr[XYM]|^GL|^KI|^chrUn|^chrEBV/ {
    cov[$1] = $3 / $2
}
END {
    n = asort(cov, sorted)
    med = sorted[int(n/2)+1]
    for (c in cov) printf "%s\t%.3f\n", c, cov[c]/med
}'

For full ancestry / contamination / relatedness checking, use verifybamid2, somalier, or peddy -- they account for population AFs, not just per-contig depth.

Mismatch Rate

Picard CollectAlignmentSummaryMetrics

java -jar picard.jar CollectAlignmentSummaryMetrics \
    I=input.bam \
    R=reference.fa \
    O=alignment_summary.txt

Key Metrics

Comprehensive Validation Script

Goal: Run all key alignment QC checks in a single pass and generate a summary report.

Approach: Combine samtools flagstat, stats, idxstats, and strand counts into one script that outputs pass/warn/fail calls.

#!/bin/bash
BAM=$1
REF=$2
NAME=$(basename $BAM .bam)
OUTDIR=${3:-qc}

mkdir -p $OUTDIR

echo "=== Alignment Validation: $NAME ===" | tee $OUTDIR/report.txt

echo -e "\n--- Flagstat ---" | tee -a $OUTDIR/report.txt
samtools flagstat $BAM | tee -a $OUTDIR/report.txt

echo -e "\n--- Mapping Rate ---" | tee -a $OUTDIR/report.txt
mapped=$(samtools view -c -F 4 $BAM)
total=$(samtools view -c $BAM)
rate=$(echo "scale=2; $mapped / $total * 100" | bc)
echo "Mapping rate: ${rate}%" | tee -a $OUTDIR/report.txt

echo -e "\n--- Proper Pairing ---" | tee -a $OUTDIR/report.txt
proper=$(samtools view -c -f 2 $BAM)
pair_rate=$(echo "scale=2; $proper / $mapped * 100" | bc)
echo "Proper pairing: ${pair_rate}%" | tee -a $OUTDIR/report.txt

echo -e "\n--- Insert Size ---" | tee -a $OUTDIR/report.txt
samtools stats $BAM | grep "insert size average" | tee -a $OUTDIR/report.txt

echo -e "\n--- Strand Balance ---" | tee -a $OUTDIR/report.txt
fwd=$(samtools view -c -F 16 $BAM)
rev=$(samtools view -c -f 16 $BAM)
strand_ratio=$(echo "scale=3; $fwd / $rev" | bc)
echo "Forward: $fwd, Reverse: $rev, Ratio: $strand_ratio" | tee -a $OUTDIR/report.txt

echo -e "\n--- Chromosome Coverage ---" | tee -a $OUTDIR/report.txt
samtools idxstats $BAM | head -25 | tee -a $OUTDIR/report.txt

echo -e "\nReport: $OUTDIR/report.txt"

Python Validation Module

A skeleton; full implementation is in examples/validate_alignment.py:

import pysam

class AlignmentValidator:
    def __init__(self, bam_file):
        self.bam = pysam.AlignmentFile(bam_file, 'rb')

    def report(self, sample_size=100000):
        # Sample reads, compute mapping rate, proper-pair rate, MAPQ dist, strand balance
        # See examples/validate_alignment.py for full implementation
        ...

The first-N-reads sampling pattern is biased toward chr1 (different GC content and complexity than chrM/chrX/chrY/alt contigs). For unbiased per-chromosome statistics, use samtools view -s 42.01 input.bam (the INT.FRAC form uses INT as the seed; specify an explicit nonzero seed so the subsample is documented and consistent across paired runs) instead of head-of-file iteration.

Quality Thresholds Summary

Related Skills

• bam-statistics - Per-assay metric thresholds, depth/coverage tools, mosdepth
• alignment-filtering - Aligner-specific MAPQ thresholds (canonical home)
• duplicate-handling - Library-aware dedup decisions
• sam-bam-basics - MAPQ-by-aligner table
• chip-seq/chipseq-qc - ChIP-specific QC (FRiP, NSC, RSC)