Component System in Godot 4.3+

Build behavior through composition. Attach small, focused components to any entity rather than climbing an inheritance chain. All examples target Godot 4.3+ with no deprecated APIs.

Related skills: scene-organization for scene tree composition, event-bus for decoupled component communication, resource-pattern for data-driven component configuration, physics-system for Area2D/3D overlap detection and collision shapes, ability-system for an AbilityComponent example built on this pattern.

1. Why Components

Key benefits:

• Reuse across entities — a HealthComponent works on a player, an enemy, a destructible crate, or a boss with no code changes.
• Separation of concerns — damage detection, health tracking, and state animation are each their own file. Debugging is local.
• Mix-and-match behaviors — give an enemy a HitboxComponent and a PatrolComponent independently. Removing one does not affect the other.

2. Component Design Rules

1. One responsibility per component. If you find yourself naming it HealthAndShieldAndRegenComponent, split it.
2. Communicate via signals, not direct sibling access. A component must not call getparent().getnode("SiblingComponent"). Emit a signal instead.
3. Stateless where possible. Prefer deriving state from inputs and @export configuration over storing mutable state. When state is necessary, keep it private.
4. Use @export for all configuration. Damage amount, cooldown duration, and layer masks belong in the Inspector, not hardcoded constants.

3. Common Components

4. HitboxComponent

Attach to any entity that deals damage. Configure damage in the Inspector.

GDScript (hitbox_component.gd)

class_name HitboxComponent
extends Area2D

## Damage dealt to the target hurtbox on contact.
@export var damage: int = 10

## Minimum seconds between successive hits (0 = no cooldown).
@export var cooldown_duration: float = 0.5

signal hit(target_hurtbox: HurtboxComponent)

var _on_cooldown: bool = false

@onready var _cooldown_timer: Timer = _build_timer()


func _ready() -> void:
	area_entered.connect(_on_area_entered)


func _on_area_entered(area: Area2D) -> void:
	if _on_cooldown:
		return
	if area is not HurtboxComponent:
		return
	hit.emit(area)
	area.receive_hit(damage)
	if cooldown_duration > 0.0:
		_on_cooldown = true
		_cooldown_timer.start(cooldown_duration)


func _on_cooldown_timeout() -> void:
	_on_cooldown = false


func _build_timer() -> Timer:
	var t := Timer.new()
	t.one_shot = true
	t.timeout.connect(_on_cooldown_timeout)
	add_child(t)
	return t

C# (HitboxComponent.cs)

using Godot;

public partial class HitboxComponent : Area2D
{
    /// <summary>Damage dealt to the target hurtbox on contact.</summary>
    [Export] public int Damage { get; set; } = 10;

    /// <summary>Minimum seconds between successive hits (0 = no cooldown).</summary>
    [Export] public float CooldownDuration { get; set; } = 0.5f;

    [Signal] public delegate void HitEventHandler(HurtboxComponent targetHurtbox);

    private bool _onCooldown;
    private Timer _cooldownTimer;

    public override void _Ready()
    {
        _cooldownTimer = new Timer { OneShot = true };
        _cooldownTimer.Timeout += OnCooldownTimeout;
        AddChild(_cooldownTimer);

        AreaEntered += OnAreaEntered;
    }

    private void OnAreaEntered(Area2D area)
    {
        if (_onCooldown) return;
        if (area is not HurtboxComponent hurtbox) return;

        EmitSignal(SignalName.Hit, hurtbox);
        hurtbox.ReceiveHit(Damage);

        if (CooldownDuration > 0f)
        {
            _onCooldown = true;
            _cooldownTimer.Start(CooldownDuration);
        }
    }

    private void OnCooldownTimeout() => _onCooldown = false;
}

5. HurtboxComponent

Attach to any entity that can take damage. Wire it to a sibling HealthComponent via @export.

GDScript (hurtbox_component.gd)

class_name HurtboxComponent
extends Area2D

## Reference to the HealthComponent on the same entity.
@export var health_component: HealthComponent

## Invincibility frame duration in seconds (0 = none).
@export var invincibility_duration: float = 0.0

signal hurt(damage_amount: int)

var _invincible: bool = false

@onready var _iframes_timer: Timer = _build_timer()


func receive_hit(damage: int) -> void:
	if _invincible:
		return
	hurt.emit(damage)
	if health_component:
		health_component.take_damage(damage)
	if invincibility_duration > 0.0:
		_invincible = true
		_iframes_timer.start(invincibility_duration)


func _on_iframes_timeout() -> void:
	_invincible = false


func _build_timer() -> Timer:
	var t := Timer.new()
	t.one_shot = true
	t.timeout.connect(_on_iframes_timeout)
	add_child(t)
	return t

C# (HurtboxComponent.cs)

using Godot;

public partial class HurtboxComponent : Area2D
{
    /// <summary>Reference to the HealthComponent on the same entity.</summary>
    [Export] public HealthComponent HealthComponent { get; set; }

    /// <summary>Invincibility frame duration in seconds (0 = none).</summary>
    [Export] public float InvincibilityDuration { get; set; } = 0f;

    [Signal] public delegate void HurtEventHandler(int damageAmount);

    private bool _invincible;
    private Timer _iframesTimer;

    public override void _Ready()
    {
        _iframesTimer = new Timer { OneShot = true };
        _iframesTimer.Timeout += OnIframesTimeout;
        AddChild(_iframesTimer);
    }

    public void ReceiveHit(int damage)
    {
        if (_invincible) return;

        EmitSignal(SignalName.Hurt, damage);
        HealthComponent?.TakeDamage(damage);

        if (InvincibilityDuration > 0f)
        {
            _invincible = true;
            _iframesTimer.Start(InvincibilityDuration);
        }
    }

    private void OnIframesTimeout() => _invincible = false;
}

6. Component Communication

Components must not call methods on siblings directly. Use signals to keep them decoupled.

┌─────────────────────────────────────────────────────┐
│  Entity (CharacterBody2D)                            │
│                                                      │
│  ┌──────────────┐    hit(hurtbox)                    │
│  │ HitboxComponent ──────────────────────────────┐  │
│  └──────────────┘                                 │  │
│                                                   ▼  │
│                              ┌─────────────────────┐ │
│                              │  HurtboxComponent   │ │
│                              │  receive_hit(dmg)   │ │
│                              │  ──── calls ──────► │ │
│                              │  HealthComponent    │ │
│                              │  .take_damage(dmg) │ │
│                              └────────┬────────────┘ │
│                                       │              │
│                              health_changed / died   │
│                                       │              │
│                              ┌────────▼────────────┐ │
│                              │  HealthComponent    │ │
│                              │  emits: died        │ │
│                              └─────────────────────┘ │
└─────────────────────────────────────────────────────┘

Flow explained:

1. HitboxComponent detects an overlapping HurtboxComponent via area_entered.
2. It emits hit(targethurtbox) (for the entity's own logic, e.g. playing a sound) and calls targethurtbox.receive_hit(damage) — the only cross-component call, and it targets the direct interface of the hurtbox, not a sibling.
3. HurtboxComponent.receivehit() emits hurt(damageamount) for animation/VFX, then calls healthcomponent.takedamage(damage) on its explicitly wired reference.
4. HealthComponent.takedamage() updates HP and emits healthchanged or died. Listeners (UI, GameManager, etc.) connect to those signals without touching the combat components.

7. Wiring Components

Three patterns in order of preference:

@export NodePath — most flexible, works across the scene tree

# hurtbox_component.gd
@export var health_component: HealthComponent

# Inspector: drag the HealthComponent node into the slot.

Gotcha: @export node references are wired via the editor inspector. If you build scenes programmatically or hand-write .tscn files, the reference may be null at runtime. In that case, wire it explicitly in the parent's _ready():
```gdscript
hurtbox.healthcomponent = healthcomponent
```

@onready direct child — simple when the component is a known child

# enemy.gd
@onready var health: HealthComponent = $HealthComponent
@onready var hurtbox: HurtboxComponent = $HurtboxComponent

get_node pattern — when the path is dynamic or optional

func _ready() -> void:
	var health := get_node_or_null("HealthComponent") as HealthComponent
	if health:
		health.died.connect(_on_died)

Prefer @export when the wired node lives elsewhere in the tree. Prefer @onready for direct children that are always present. Use getnodeor_null when the component is optional.

C# parity

// Pattern 1: [Export] property — drag-and-drop in the Inspector.
public partial class HurtboxComponent : Area3D
{
    [Export] public HealthComponent Health { get; set; }
}

// Pattern 2: GetNode<T> for a known child path (equivalent to @onready var x := $Path).
public partial class Enemy : CharacterBody3D
{
    private HealthComponent _health;
    private HurtboxComponent _hurtbox;

    public override void _Ready()
    {
        _health = GetNode<HealthComponent>("HealthComponent");
        _hurtbox = GetNode<HurtboxComponent>("HurtboxComponent");
        _health.Died += QueueFree;
    }
}

// Pattern 3: GetNodeOrNull<T> when the component is optional (equivalent to get_node_or_null).
public partial class Pickup : Node3D
{
    public override void _Ready()
    {
        var health = GetNodeOrNull<HealthComponent>("HealthComponent");
        if (health != null)
            health.Died += OnDied;
    }

    private void OnDied() { /* ... */ }
}

8. Finding Components at Runtime

Use a static utility to locate the first component of a given type on any entity. This avoids hardcoding node names across different entity scenes.

GDScript (component_utils.gd)

class_name ComponentUtils


## Returns the first child of [param entity] that is an instance of [param component_type],
## or null if none is found.
static func get_component(entity: Node, component_type: GDScript) -> Node:
	for child in entity.get_children():
		if is_instance_of(child, component_type):
			return child
	return null


## Example usage:
##   var health := ComponentUtils.get_component(enemy, HealthComponent) as HealthComponent
##   if health:
##       health.take_damage(5)

C# (ComponentUtils.cs)

using Godot;

public static class ComponentUtils
{
    /// <summary>
    /// Returns the first child of <paramref name="entity"/> that is of type
    /// <typeparamref name="T"/>, or null if none is found.
    /// </summary>
    public static T GetComponent<T>(Node entity) where T : Node
    {
        foreach (var child in entity.GetChildren())
        {
            if (child is T component)
                return component;
        }
        return null;
    }
}

// Example usage:
//   var health = ComponentUtils.GetComponent<HealthComponent>(enemy);
//   health?.TakeDamage(5);

9. Implementation Checklist

• Each component is saved as its own .tscn scene and reused by instancing
• Components communicate through signals — no getparent().getnode("Sibling") calls
• No direct sibling access anywhere inside a component script
• All tuneable values (damage, maxhealth, cooldownduration) are @export
• Each component can be tested by attaching it to a minimal test scene in isolation