AGC Tuner for WaveCap-SDR

This skill helps analyze audio dynamics and optimize AGC (Automatic Gain Control) parameters for different demodulation modes.

When to Use This Skill

Use this skill when:

• Audio output is too quiet or too loud
• Audio has "pumping" or "breathing" artifacts (AGC responding too fast/slow)
• Setting up AGC for a new demodulation mode (AM, SSB, digital)
• Comparing AGC behavior between channels
• Debugging why AGC isn't controlling gain properly
• Finding optimal attacktime, releasetime, and target_level

How It Works

The skill provides tools to:

1. Analyze audio dynamics - Measure RMS levels, peak levels, crest factor over time
2. Visualize AGC behavior - Plot gain adjustments, signal envelope, output level
3. Suggest optimal parameters - Recommend attack/release times based on signal characteristics
4. Compare settings - A/B test different AGC configurations

AGC Background

WaveCap-SDR's AGC (in backend/wavecapsdr/dsp/agc.py) maintains consistent audio output level:

class AGC:
    def __init__(self, attack_time: float, release_time: float, target_level: float):
        self.attack_alpha = 1.0 - np.exp(-1.0 / (attack_time * sample_rate))
        self.release_alpha = 1.0 - np.exp(-1.0 / (release_time * sample_rate))
        self.target_level = target_level
        self.current_gain = 1.0

Key Parameters:

• attack_time: How quickly AGC responds to increases in signal level (seconds)
• release_time: How quickly AGC responds to decreases in signal level (seconds)
• target_level: Desired RMS output level (0.0 to 1.0, typically 0.1-0.3)

Usage Instructions

Step 1: Identify Channel to Analyze

Find the channel you want to optimize:

curl http://127.0.0.1:8087/api/v1/captures | jq '.[] | .channels'

Note the channel ID (e.g., "ch1") and current AGC settings.

Step 2: Capture Audio and Analyze Dynamics

Run the AGC analyzer to capture audio and measure dynamics:

PYTHONPATH=backend backend/.venv/bin/python .claude/skills/agc-tuner/agc_analyzer.py \
  --channel ch1 \
  --duration 10 \
  --port 8087

Parameters:

• --channel: Channel ID to analyze (default: ch1)
• --duration: Seconds of audio to capture (default: 10)
• --port: Server port (default: 8087)
• --host: Server host (default: 127.0.0.1)
• --attack: Test attack time in seconds (default: current AGC setting)
• --release: Test release time in seconds (default: current AGC setting)
• --target: Test target level 0.0-1.0 (default: current AGC setting)
• --plot: Generate plots of AGC behavior
• --output: Save plots to file

Step 3: Interpret Results

The script outputs:

Signal Characteristics:

• RMS Level: Average signal power over time
• Peak Level: Maximum amplitude
• Crest Factor: Peak/RMS ratio (high = dynamic, low = compressed)
• Dynamic Range: Difference between loudest and quietest parts

AGC Behavior:

• Gain Variation: How much AGC is adjusting gain
• Settling Time: How long AGC takes to stabilize
• Overshoot: Does AGC overcorrect?
• Pumping Detection: Rapid gain changes indicating poor settings

Recommendations: The script suggests optimal attack/release times based on signal type.

Step 4: Typical AGC Settings by Mode

FM Broadcast (Music/Talk):

attack_time = 0.010   # 10ms - respond quickly to peaks
release_time = 0.500  # 500ms - slow release to avoid pumping
target_level = 0.2    # 20% RMS output

AM/SSB Voice:

attack_time = 0.005   # 5ms - fast attack for speech peaks
release_time = 0.300  # 300ms - moderate release
target_level = 0.25   # 25% RMS output (voice needs more headroom)

Digital Modes (P25, DMR):

attack_time = 0.001   # 1ms - very fast attack
release_time = 0.100  # 100ms - fast release
target_level = 0.3    # 30% RMS output (digital is pre-compressed)

NOAA Weather Radio:

attack_time = 0.020   # 20ms - moderate attack
release_time = 0.800  # 800ms - very slow release (steady signal)
target_level = 0.15   # 15% RMS output (avoid distortion)

Step 5: Update Channel AGC Settings

Update AGC parameters via API:

# Update AGC settings for channel
curl -X PATCH http://127.0.0.1:8087/api/v1/channels/ch1 \
  -H "Content-Type: application/json" \
  -d '{
    "agcAttackMs": 10,
    "agcReleaseMs": 500,
    "agcTargetDb": -20
  }'

# Note: Channel settings can be updated while running (no restart needed)

Or update in backend/config/wavecapsdr.yaml presets/recipes.

Common AGC Issues and Solutions

Issue: Audio Too Quiet

Symptoms: Output barely audible even at full volume Diagnosis: Target level too low, or source signal very weak Solution:

• Increase target_level from 0.1 to 0.3
• Check if antenna/tuning is good (use audio-quality-checker skill)
• Verify channel is started and streaming

Issue: Audio Pumping/Breathing

Symptoms: Volume swells up and down, "breathing" artifacts Diagnosis: Release time too fast for signal characteristics Solution:

• Increase release_time (e.g., 0.1 → 0.5 seconds)
• For steady signals (NOAA weather), use very slow release (0.8-1.0s)
• For music, use 0.3-0.5s release

Issue: Clipping/Distortion

Symptoms: Audio sounds distorted, harsh, broken up Diagnosis: Target level too high, or attack time too slow Solution:

• Decrease target_level (e.g., 0.3 → 0.15)
• Decrease attack_time to catch peaks faster (e.g., 0.02 → 0.005)
• Check for overmodulation at source (reduce SDR gain)

Issue: Slow Response to Level Changes

Symptoms: AGC doesn't adjust quickly enough when switching between quiet/loud Diagnosis: Attack time too slow Solution:

• Decrease attack_time (e.g., 0.05 → 0.01 seconds)
• Be careful not to go too fast or AGC will respond to individual waveforms

Advanced: Testing Parameter Sweeps

Test multiple AGC configurations and compare:

# Test attack times from 1ms to 50ms
for attack in 0.001 0.005 0.010 0.020 0.050; do
  echo "Testing attack_time=$attack"
  PYTHONPATH=backend backend/.venv/bin/python .claude/skills/agc-tuner/agc_analyzer.py \
    --channel ch1 \
    --duration 5 \
    --attack $attack \
    --release 0.5 \
    --target 0.2 \
    --output "agc_test_attack_${attack}.png"
done

Compare the output plots to find optimal settings.

Technical Details

AGC Algorithm: The AGC uses exponential smoothing to track signal envelope:

# Compute signal envelope (RMS)
envelope = sqrt(mean(signal^2))

# Compute desired gain
desired_gain = target_level / envelope

# Smooth gain changes
if desired_gain < current_gain:
    # Attack: signal increased, reduce gain quickly
    current_gain += attack_alpha * (desired_gain - current_gain)
else:
    # Release: signal decreased, increase gain slowly
    current_gain += release_alpha * (desired_gain - current_gain)

# Apply gain
output = signal * current_gain

Time Constants: Attack/release times are converted to smoothing factors (alpha):

alpha = 1.0 - exp(-1.0 / (time_constant * sample_rate))

• Larger time constant → slower response (smaller alpha)
• Smaller time constant → faster response (larger alpha)

Headroom: AGC maintains headroom to avoid clipping:

• Target level of 0.2 means output RMS is 20% of full scale
• This leaves ~14 dB of headroom for peaks (crest factor ~5)

Files in This Skill

• SKILL.md: This file - instructions for using the skill
• agc_analyzer.py: Audio dynamics analyzer and AGC simulator

Notes

• AGC operates on demodulated audio (after FM/AM demodulation)
• For best results, test with real signals (not test tones)
• AGC settings are per-channel, not global
• Extremely fast attack times (<1ms) can cause distortion
• Very slow release times (>2s) can make AGC unresponsive
• Target level around 0.2 (20%) is a good starting point