NVIDIA GPU Host Setup

Standalone install? If this session was not initialized by the TAO skill bank plugin, run the tao-setup skill first (host preflight, credentials, cross-skill discovery).

Use this setup skill before TAO workflows run on the docker, local-docker, or kubernetes backend. The TAO-wide default minimums are:

• NVIDIA driver >=580 (open kernel module preferred)
• CUDA Toolkit >=13.0
• NVIDIA Container Toolkit >=1.19.0
• Docker engine — only installed for docker / local-docker backends and

only when Docker is missing. The package picked depends on the distro family (docker.io on Debian-family by default, moby-engine / docker-ce from download.docker.com on RHEL-family, docker on SUSE-family). Pass --skip-docker-install to opt out.

The check is safe and read-only by default — it works on any Linux distribution because it only probes nvidia-smi, the CUDA toolkit path, the installed container-toolkit package version (via dpkg/rpm/the nvidia-ctk binary version), and the Docker daemon's NVIDIA runtime.

Installation must be explicitly authorized by the user and rerun with --install. The install path is automated for these distro families:

Quick Start

From the skill bank root:

# Check the local Docker backend host.
bash skills/platform/tao-setup-nvidia-gpu-host/scripts/setup-nvidia-gpu-host.sh --backend docker --check-only

# Install or repair after user approval.
bash skills/platform/tao-setup-nvidia-gpu-host/scripts/setup-nvidia-gpu-host.sh --backend docker --install

# Check a Kubernetes GPU worker host.
bash skills/platform/tao-setup-nvidia-gpu-host/scripts/setup-nvidia-gpu-host.sh --backend kubernetes --check-only

⚠️ Note — running non-interactively (agent/skill runs): a skill run has no terminal, so the
installer's Continue? [y/N] prompt cannot be answered. After running --check-only to preview and
getting the user's approval, append the assume-yes flag (--yes) to the --install command so it
proceeds without a prompt — this auto-confirms installation of system packages (NVIDIA driver, CUDA
Toolkit, NVIDIA Container Toolkit, and Docker for Docker backends) and modifies the host, so only do
this on a host you control. A person running --install directly at a terminal gets the prompt instead.

Workflow Contract

Docker and Kubernetes workflows must run the check before submitting GPU work:

SB="${TAO_SKILL_BANK_PATH:-${TAO_SKILL_BANK_ROOT:-$PWD}}"
SETUP_SCRIPT="${SB}/skills/platform/tao-setup-nvidia-gpu-host/scripts/setup-nvidia-gpu-host.sh"

bash "$SETUP_SCRIPT" --backend docker --check-only || {
  echo "MISSING: TAO GPU host runtime is not ready."
  echo "After user approval, run (append --yes for non-interactive agent runs):"
  echo "  bash \"$SETUP_SCRIPT\" --backend docker --install"
  exit 1
}

Never install silently. If the check fails, explain what is missing, ask the user to authorize the fix, then run the install command and rerun the check.

Model Runtime Override Contract

Platform defaults apply when a model has no override. A model that needs a different validated host stack declares it in references/skill_info.yaml:

runtime_requirements:
  gpu_host:
    min_driver_version: '<version>'
    min_cuda_version: '<version>'
    min_container_toolkit_version: '<version>'

Read those values before the final platform preflight and pass them to the matching --min-*-version flags. Model minimums take precedence for that workflow only; do not rewrite the platform defaults or requirements for other models. Version checks use numeric lower bounds, so later compatible releases pass. Always retain the selected-image GPU smoke test because a version bound cannot prove support for a particular GPU architecture.

What The Installer Does

The installer dispatches on the detected distribution family. On every supported family it adds NVIDIA's CUDA and Container Toolkit repositories (if missing), installs packages that satisfy the active minimums, optionally installs Docker, wires the NVIDIA Docker runtime, and adds the invoking user to the docker group.

Common steps (all families):

1. Adds NVIDIA's CUDA repository if missing (apt cuda-keyring deb,

cuda-<distro>.repo for dnf/zypper).

1. Adds NVIDIA's Container Toolkit repository if missing (.list for apt,

.repo for dnf/zypper).

1. Installs the matching kernel header / devel package for the running

kernel.

1. Installs the current open-driver and Container Toolkit packages from the

configured repositories plus the CUDA Toolkit package selected by --min-cuda-version, then verifies all three against the active minimums.

1. For Docker backends and when Docker is missing, installs Docker

(override / opt-out flags below), enables/starts the daemon, then runs nvidia-ctk runtime configure --runtime=docker and restarts Docker when systemctl is available.

1. Adds the invoking user ($SUDO_USER if available, else $USER) to the

docker group so subsequent shells can run docker without sudo — opt out with --skip-docker-group. The new group membership does not take effect in the current shell: log out and back in, or run newgrp docker in each new shell.

1. Attempts modprobe nvidia so verification can pass before reboot.

Family-specific package selections:

Verification

After installation, verify:

nvidia-smi
nvcc --version
docker info --format '{{json .Runtimes}}' | grep nvidia
sudo docker run --rm --runtime=nvidia --gpus all "$TAO_IMAGE" nvidia-smi -L

The detected driver, CUDA Toolkit, and Container Toolkit versions must meet the active TAO-wide or model-specific minimums. Then run the selected image's GPU smoke test; version comparison alone is not sufficient compatibility proof.

Kubernetes Notes

For self-managed Kubernetes clusters, run the host installer on every GPU worker node or bake the same package set into the node image before installing the NVIDIA GPU Operator or device plugin.

The workflow check also warns if kubectl is available but the cluster reports no nvidia.com/gpu allocatable capacity. In that case, install/configure the NVIDIA GPU Operator after the worker host runtime is ready:

helm repo add nvidia https://helm.ngc.nvidia.com/nvidia
helm repo update
helm install --wait gpu-operator -n gpu-operator --create-namespace nvidia/gpu-operator

Managed Kubernetes providers may own driver installation through node images or GPU Operator policy. Do not overwrite a provider-managed GPU node without user approval and a rollback plan.

Failure Modes

Unsupported distribution family: --install automates debian-, rhel-, and suse-family hosts. On Arch, Alpine, Gentoo, NixOS, FreeBSD, or anything without /etc/os-release (e.g. macOS), the script exits with a clear error that lists the four version targets and the upstream NVIDIA install-guide URLs:

• https://docs.nvidia.com/cuda/cuda-installation-guide-linux/
• https://docs.nvidia.com/datacenter/cloud-native/container-toolkit/latest/install-guide.html
• https://docs.docker.com/engine/install/

Install those four pieces using your distribution's package manager and rerun the script with --check-only to verify. The check is universally portable — it only queries the binaries / package databases — so once the runtime is in place the workflow contract is satisfied regardless of the underlying distro.

Unsupported Ubuntu/Debian derivative: When ID is e.g. pop, mint, zorin, raspbian, or another debian-family derivative, the script maps the host onto the upstream Ubuntu/Debian CUDA repo via UBUNTUCODENAME / VERSIONCODENAME (focal/jammy/noble → Ubuntu 20.04/22.04/24.04; bullseye/bookworm/trixie → Debian 11/12/12). If the host's codename doesn't match a known upstream release, --install exits with the same manual-install guidance described above.

Docker not installed: --check-only reports MISSING: Docker is not installed and prints the exact rerun command appropriate to the detected distro family. The default --install path installs Docker (docker.io / moby-engine / docker-ce / docker depending on family), enables/starts the daemon, configures the NVIDIA runtime, and adds the invoking user to the docker group. If you prefer to manage Docker yourself, install it before rerunning the script or pass --skip-docker-install.

Docker installed but docker run still needs sudo: The script adds the invoking user to the docker group, but Linux only refreshes group membership on a new login session. Log out and back in, or run newgrp docker in each new shell, until the new membership is active.

Docker runtime still missing: Restart Docker, then rerun nvidia-ctk runtime configure --runtime=docker.

Detected version is below the active minimum: Rerun the same command with --install after approval, preserving any model-specific --min-*-version flags. Package-name environment overrides select distribution-specific driver packages but do not weaken the minimum-version checks.

Driver installed but nvidia-smi fails: Load the module with sudo modprobe nvidia or reboot. Secure Boot may require MOK enrollment on systems where it is enabled.

Kubernetes still has no GPU capacity: Confirm the driver works on each GPU node with nvidia-smi, then check the GPU Operator/device plugin pods and node labels.