laurigates/mcu-tinkering-lab

1

esp32-debugging Debug ESP32 firmware issues including compilation errors, runtime panics, memory issues, and communication failures

laurigates/mcu-tinkering-lab

269

2

embedded-best-practices Embedded systems development best practices for ESP32, FreeRTOS, and ESP-IDF. Use when writing firmware code, reviewi…

laurigates/mcu-tinkering-lab

94

3

esp-idf-setup Set up ESP-IDF development environment, create new projects, and verify configuration

laurigates/mcu-tinkering-lab

50

4

dual-controller-sync Debug and synchronize communication between the robocar main controller (Heltec WiFi LoRa 32) and camera module (ESP3…

laurigates/mcu-tinkering-lab

32

5

safe-build-operations Safely execute build, flash, and monitor operations for ESP32/MCU projects. Prevents dangerous operations and validat…

laurigates/mcu-tinkering-lab

32

6

wiring-doc Generate a standardized WIRING.md for an ESP32 project by analyzing source code pin assignments

laurigates/mcu-tinkering-lab

15

7

sdkconfig-audit Audit sdkconfig.defaults by inferring needed settings from source code analysis

laurigates/mcu-tinkering-lab

14

8

wifi-sta-setup Apply or audit the canonical ESP-IDF WiFi STA configuration for a monorepo project

laurigates/mcu-tinkering-lab

14

9

credential-setup Standardize credential handling for an ESP32 project (credentials.h.example, .gitignore, pre-commit protection)

laurigates/mcu-tinkering-lab

13

10

flash Flash firmware to an ESP32 device

laurigates/mcu-tinkering-lab

13

11

project-readme Generate a standardized README.md for an ESP32 project by analyzing source code, justfile, and hardware configuration

laurigates/mcu-tinkering-lab

13

12

review-firmware Review embedded C/C++ code changes for best practices

laurigates/mcu-tinkering-lab

13

13

build Build an ESP32 project (containerized)

laurigates/mcu-tinkering-lab

12

14

develop Full development cycle - build, flash, and monitor

laurigates/mcu-tinkering-lab

12

15

lint Run linting and formatting checks on codebase

laurigates/mcu-tinkering-lab

12

16

monitor Start serial monitor for MCU device

laurigates/mcu-tinkering-lab

12

17

project-health Audit project completeness against the monorepo standard checklist (docs, config, registration)

laurigates/mcu-tinkering-lab

12

18

research-boards Research and report on new microcontroller board releases from ESP32, STM32, and other manufacturers

laurigates/mcu-tinkering-lab

12

19

sim Run robocar physics simulation environment

laurigates/mcu-tinkering-lab

12

20

project-claude-md Generate a CLAUDE.md for a project with build commands, hardware constraints, architecture, and development tasks

laurigates/mcu-tinkering-lab

11

21

register-project Register a project in the monorepo — justfile mod, CI matrix, standard file inventory

laurigates/mcu-tinkering-lab

11

22

audio-static-debugging Debug static, hiss, or noise on embedded I2S audio (ESP32 + MAX98357A / PCM DACs), especially streamed PCM. Measure t…

laurigates/mcu-tinkering-lab

3

23

build-guide Generate a printable Typst build guide (source + PDF) for an ESP32/MCU project by analyzing its docs, source, and sch…

laurigates/mcu-tinkering-lab

2

24

gemini-tts-voice The Gemini TTS request surface as this repo uses it — the streaming (SSE) endpoint, inline delivery tags, prebuilt vo…

laurigates/mcu-tinkering-lab

1