LoadLynx User Operations

Use this skill on a normal user's computer. All skill-driven hardware operation must go through released loadlynx and loadlynx-devd binaries from GitHub Releases.

Start Here

• Install this skill with:

npx skills add https://github.com/IvanLi-CN/loadlynx --skill loadlynx-user-operations -g

• Update this skill with:

npx skills update loadlynx-user-operations -g

• Never require the user to clone the repository or install Rust, Bun, Just, mcu-agentd, espflash, or probe-rs.
• Use only released LoadLynx host tools and released firmware assets from https://github.com/IvanLi-CN/loadlynx/releases.
• Do not use the Web UI as the skill's agent-operated hardware path. Web Serial is a supported human browser path, not the default agent control path.
• Before giving any CLI workflow, verify the installed program supports it:

loadlynx --help
loadlynx-devd --help
loadlynx -v

• The current stable CLI surface should expose top-level commands such as devices, device, status, status-stream, cc, cv, cp, pd, wifi, control, preset, and flash.
• loadlynx-devd --help must expose both serve and bridge-http.
• If the requested workflow depends on a command that is absent, stop and report that the installed release does not support it. Do not invent commands, fall back to Web UI, or switch to source/developer instructions.

Install Released Host Tools

• Download the latest stable Release unless the owner explicitly accepts a prerelease.
• Prefer the release installer script:

- macOS/Linux: install-loadlynx-host.sh - Windows: install-loadlynx-host.ps1

• The installer downloads the platform archive, downloads SHA256SUMS, verifies the selected archive hash, installs into a user-owned directory, validates the binaries, and prints PATH guidance. It must not edit shell startup files or PATH automatically.
• If the installer fails in transport, switch to manual release-asset installation instead of silently continuing with an older binary.
• If installing manually, choose the platform archive:

- Apple Silicon macOS: loadlynx-host-tools-macos-aarch64.tar.gz - Intel macOS: loadlynx-host-tools-macos-x8664.tar.gz - Linux x8664: loadlynx-host-tools-linux-x8664.tar.gz - Windows x8664: loadlynx-host-tools-windows-x86_64.tar.gz

• Manual installs must verify the archive against the release SHA256SUMS before extraction.
• On macOS or Linux:

mkdir -p "$HOME/.local/bin"
tar -xzf "$HOME/Downloads/loadlynx-host-tools-<platform>.tar.gz" -C "$HOME/.local/bin"
chmod +x "$HOME/.local/bin/loadlynx" "$HOME/.local/bin/loadlynx-devd"

• Verify after installation:

loadlynx --help
loadlynx-devd --help
loadlynx -v

Connect Hardware

• Connection priority is saved device first, then direct USB/LAN discovery.
• Start the local daemon only when needed for long-running local USB sessions:

loadlynx-devd serve

• The current loadlynx CLI auto-manages its local control path. Do not try to pass legacy daemon URL flags unless a future released CLI explicitly documents them again.
• loadlynx-devd bridge-http is only for browser/Web/debug paths and must bind loopback only:

loadlynx-devd bridge-http --bind 127.0.0.1:30180

• Keep the bridge running while the browser uses it. Do not expose it on non-loopback interfaces.
• Do not edit project-local caches or developer selector files by hand.

CLI Device Memory

• The CLI must be the source of remembered hardware. Do not rely on Web local storage, browser history, or project-local cache files for user workflows.
• Use the current released device commands:

loadlynx devices
loadlynx device list
loadlynx device add --name <name>
loadlynx device add --usb-port <path> --name <name>
loadlynx device add --url http://<device-host-or-ip> --name <name>
loadlynx device use <id>
loadlynx device use --global <id>
loadlynx device use --clear
loadlynx device remove <id>

• loadlynx devices --json and loadlynx device list --json expose the persisted device list plus the current global default.
• loadlynx device add --usb-port <path> --name <name> is the formal non-interactive path for saving a known USB serial port path. Use it in automation when the owner has specified the exact port.
• loadlynx device add without extra selectors is interactive; in non-interactive automation it fails by design. Do not fake around that with manual JSON edits.
• Prefer using a saved --device <id> target instead of repeatedly retyping hostnames or URLs.

LoadLynx Business Workflows

• Treat transport selection as preparation only. The user-facing job is operating the LoadLynx electronic load and PD sink safely through released CLI commands.
• Identity and status:

loadlynx devices
loadlynx status --device <id>
loadlynx status-stream --device <id> --interval-ms <ms> [--count <n>] --json
loadlynx control get --device <id>

• loadlynx status --device <id> --json is the primary released read path for live telemetry, fault flags, link state, temperatures, voltage, current, power, and enable state.
• loadlynx status-stream --device <id> --interval-ms <ms> --json is the primary released continuous telemetry path for tests that need stable sample cadence. With --json, stdout is NDJSON: one compact JSON status sample per line for the whole sample stream. Diagnostics and final summaries belong on stderr, not stdout, so downstream collectors can parse stdout as pure NDJSON.
• loadlynx control get --device <id> --json reports the current mode, output-enabled state, active preset, and control snapshot.
• Electronic-load control:

loadlynx cc <target_i_ma> --device <id> [--min-v-mv <mv>] [--max-i-ma-total <ma>] [--max-p-mw <mw>]
loadlynx cv <target_v_mv> --device <id> [--min-v-mv <mv>] [--max-i-ma-total <ma>] [--max-p-mw <mw>]
loadlynx cp <target_p_mw> --device <id> [--min-v-mv <mv>] [--max-i-ma-total <ma>] [--max-p-mw <mw>]
loadlynx cc <target_i_ma> --device <id> --disable
loadlynx cv <target_v_mv> --device <id> --disable
loadlynx cp <target_p_mw> --device <id> --disable
loadlynx control set --device <id> --enable
loadlynx control set --device <id> --disable

• Use --max-i-ma-total and --max-p-mw as protection rails when running power tests.
• USB-PD operation:

loadlynx pd set --device <id> --mode fixed --object-pos <n>
loadlynx pd set --device <id> --mode pps --target-mv <mv> --i-req-ma <ma>

• Use --allow-extended-voltage true|false only when the user explicitly wants to cross the extended-voltage gate.
• Presets:

loadlynx preset list --device <id>
loadlynx preset set --device <id> --file <file>
loadlynx preset apply --device <id> <preset_id>

• Wi-Fi:

loadlynx wifi show --device <id>
loadlynx wifi set --device <id> --ssid <ssid> --psk <psk> [--wait]
loadlynx wifi clear --device <id>

• Never echo PSKs or secrets in chat, logs, screenshots, traces, or shell history.
• Wi-Fi writes must use an independent management path such as USB/devd. Do not use LAN HTTP, mDNS, a saved HTTP transport, "verified LAN", or an unsafe override to continue wifi set or wifi clear; bind/use USB/devd for the same device first.
• Firmware:

loadlynx flash digital --device <id> --artifact <artifact>
loadlynx flash analog --device <id> --artifact <artifact>

• The default flash path is dry-run first; --no-dry-run is the real flash gate.
• Real flash also requires --confirm <target> and --acknowledge-non-project-firmware when applicable. A successful flash command alone is not enough to claim the device is usable; verify identity and status afterward.

External USB-C Source Validation

• Use LoadLynx as a generic validation sink for external USB-C source devices without embedding another project's workflow into this skill.
• Use a saved device target and prefer the saved USB/devd transport for operations that change LoadLynx state:

loadlynx status --device <id> --json
loadlynx pd set --device <id> --mode fixed --object-pos <n>
loadlynx pd set --device <id> --mode pps --target-mv <mv> --i-req-ma <ma>
loadlynx cv <target_v_mv> --device <id> --max-i-ma-total <ma> --max-p-mw <mw>
loadlynx cv <target_v_mv> --device <id> --disable

• loadlynx pd set is the PD sink stimulus path. loadlynx cv <targetvmv> is the voltage-clamp load stimulus path for pushing a source device toward its current-limit or constant-current behavior.
• For external current-limit validation, treat the external DUT's own diagnostics as the primary verdict. LoadLynx terminal voltage, current, power, and PD contract state are auxiliary cross-checks that help explain the stimulus and observed operating point.
• A sink-side voltage drop during CV loading is not by itself a failure. If the external DUT reports that it is current-limiting as configured and has no relevant fault latch, the voltage drop can be expected evidence that the source entered constant-current regulation.
• Always disable the LoadLynx output after the run and verify status before claiming the setup is restored.

Download Released Firmware

• Download firmware only from the chosen GitHub Release.
• Prefer a release-provided firmware catalog such as loadlynx-firmware-catalog-v0.5.1.json, plus the firmware files referenced by that catalog.
• Keep downloaded firmware and catalog files together in one user-owned folder so relative catalog paths can resolve.

Web Serial

• GitHub Pages and release Web bundles are supported human browser paths for identity, status, control, Wi-Fi, diagnostics, and flash only when the browser exposes Web Serial.
• Web Serial saves identity/profile only and reconnects through browser-granted ports. It must not save OS port paths.
• Unsupported browsers must guide the user to Chrome/Edge or the released CLI/devd tools.

Escalate Out

• Switch to skills/loadlynx-developer-operations/SKILL.md for source checkout, cloning, project builds, local devd builds, release workflow changes, probe or selector maintenance, HIL/debug sessions, or implementing missing CLI features.
• If a hardware operation is only available through Web UI and not through released loadlynx, stop and escalate to developer work to add and release the CLI capability.
• Do not use raw HTTP writes or source-tree commands to bypass missing released user functionality.

Safety Checks

• Before enabling output, changing sink mode, or flashing firmware, verify the selected device identity and target.
• Treat command absence, link-down states, analog fault states, target mismatch, and hash mismatch as stop conditions.
• After changing settings, flashing, or configuring Wi-Fi, verify status and reconnect behavior before claiming success.