Plan here, build there

You do the thinking on this machine. A separate agent — Claude Code or Codex, installed on a Hetzner VM — does the building. Each slice of the plan gets its own VM, its own branch and its own PR. The job runs under systemd on the VM, so it keeps going after the SSH session ends and after the laptop closes.

Do not use this to drive a remote machine step by step. The handoff is one-shot: the remote agent gets a written brief and the repo, and nothing else.

Before anything else: is hdev installed?

Installing this skill does not install the CLI it drives. Run this first, every session, before promising the user anything:

command -v hdev

If that prints a path, skip to the Procedure. If it prints nothing, install it now — do not try to work around a missing hdev:

git clone https://github.com/dennisonbertram/hdev ~/develop/hdev

Then put it on PATH. Try a directory that is already there, so no shell profile needs editing:

mkdir -p ~/.local/bin && ln -sfn ~/develop/hdev/bin/hdev ~/.local/bin/hdev

That only works if ~/.local/bin is on PATH. Check, and fall back to the shell profile if it is not:

case ":$PATH:" in
  *":$HOME/.local/bin:"*) echo "on PATH — done" ;;
  *) echo 'export PATH="$HOME/.local/bin:$PATH"' >> ~/.zshrc
     echo "added to ~/.zshrc — tell the user to open a new terminal" ;;
esac

Confirm before continuing, in a login shell rather than the current one, because the current shell may have a PATH the user's next terminal will not:

zsh -lic 'command -v hdev && hdev mode'

If the user runs bash, use ~/.bashrc and bash -lic instead.

Writing to a shell profile is deliberately not pre-approved in this skill's allowed-tools, so the user is asked before it happens. Do not work around that prompt, and tell them which file you are editing.

First run: set up the stock flow with the user

Do this once per machine, before the first job. Two decisions, and they are the user's, not yours. Ask; do not pick silently.

Decision 1 — which agent runs the work

hdev login status

• Claude Code (default). Runs on the user's subscription, real enforced

subagents, safe to question mid-run. Needs hdev login.

• pi (-a pi). Runs on any model through a provider key, does not touch

the Claude window at all, and is the right tool for mechanical work. No subagent tool, and hdev ask refuses while it is running.

Most people want Claude set up regardless, and pi as well if they do volume mechanical work. Set up Claude first; it is one command.

Decision 2 — if they want pi, which model

Show them the real options and the trade-off, then let them choose:

hdev model --list

The default is openrouter/deepseek/deepseek-v4-flash, and most users should keep it. It costs $0.14 per million input tokens and $0.28 per million output, and it gives 1,048,576 tokens of context with a 393,216-token output limit. That is enough for any slice you should be writing.

The trade-off to explain is reasoning against price, not speed. A job runs unattended on a VM while the user does something else, so a model that answers in two seconds instead of twenty saves the user nothing. Do not recommend a model because it is fast.

Move up the catalog only for a real reason:

• The slice needs stronger reasoning than flash gives → deepseek-v4-pro,

about 8× the price.

• The work is dense code in a large file → qwen3-coder, but check its

65,536-token output limit against the size of the diff.

Once they pick:

hdev model openrouter/deepseek/deepseek-v4-flash   # or any pi model id
hdev login pi                                      # captures the credential for that provider

Check that the saved model and the captured credential agree. hdev model prints the model and hdev login status shows which provider was captured. A model whose provider has no credential fails when the job starts, not when the model is set.

hdev model saves the choice, so it is not an environment variable anyone has to remember. hdev model on its own shows what is set.

If they have no provider key, say so plainly and move on with Claude. pi is an option, not a requirement, and nothing else depends on it.

First run in a project: build it a profile

The base image has node, git, gh and the agents. It has no browser, no Docker, no Python, no Bun. A job needing those will report itself blocked, and the user finds out after waiting rather than before.

So the first time this skill is used in a repository, spend two minutes getting the environment right. Do this once per project, not once per job.

1. Read what the project actually needs. Look, do not assume:

The CI workflow is the most reliable source. It is the list someone already had to get right.

2. Check what profiles exist. hdev images. If one already covers it, use it with -p and stop here.

3. Otherwise build one. For a browser or Docker, the shipped profiles cover it. For anything else, let a job install it and capture the result:

hdev submit -k -b setup -m "Install <exact toolchain> so this project's test
suite runs. Then run the suite and report the command and the pass/fail counts.
Change no repository files."
hdev snapshot <job> <project-name>     # once it reports success
hdev submit -p <project-name> plan.md  # every later job starts there

-k keeps the VM so it can be captured. hdev snapshot scrubs credentials and the work tree first, and refuses while the job is still running.

4. Tell the user what you built and what it does not cover. Name the profile and say which of their suites still cannot run on it.

Do not skip to submitting real work on the base image and then report a pile of "could not verify" results. Getting the environment right first is cheaper than a job that runs for ten minutes and verifies nothing.

Procedure

1. Plan on this machine

Explore the codebase here, where it is cheap, and write the plan to a file. This is the normal planning work — read the code, find the real seams, decide the approach.

2. Slice the plan

Write the plan with one ## Slice: heading per independently shippable piece:

# Rate limiting rollout

## Slice: Add the token bucket
Implement a token bucket in `lib/ratelimit.ts`. 60 requests per minute per key.
Done when: `npm test lib/ratelimit.test.ts` passes.

## Slice: Wire /api/send
Call the bucket in `app/api/send/route.ts` before the handler. Return 429 with
a Retry-After header when the bucket is empty.
Done when: the new integration test passes.

A slice is only ready when it has all five of these. This list comes from the fast-efficient skill, which measured it against a cheap implementer; it applies to every remote agent here for the same reason.

1. One runnable acceptance command, and the exact numbers it must print.

Record the baseline first: 233 passed, 3 skipped. "Make the tests pass" is not an acceptance condition.

1. Tests that already exist and already fail. You write them, here, before

submitting. Run them and confirm they fail for the right reason — a 404 because the route is missing is a correct failure; a connection error is not. Push them, because the VM clones from GitHub.

1. A closed list of files the agent may create or change. Name every one.

Everything else is out of bounds and the reviewer checks it.

1. The exact contract: type signatures, field names, check order, status

codes, error strings — written out verbatim, not described. A gap in the contract becomes a gap in the code.

1. A size a reviewer will actually read. The default model allows 393,216

output tokens, so the model's limit is not what bounds a slice — the PR is. If you cannot name every file the slice touches, it is too big. Split it. Check the output limit in hdev model --list only when the user has chosen a model with a smaller one, such as qwen3-coder at 65,536.

Two more that are specific to running remotely:

• Slices must not depend on each other. They run in parallel on separate

VMs from the same base commit and produce separate PRs.

• No secrets in the text. Credentials reach the VM over SSH separately.

~/.claude/skills/fast-efficient/assets/slice-template.md is a blank packet in exactly this shape. Start from it rather than freehand.

3. Check the repo state, then submit

hdev clones from the GitHub remote, so anything uncommitted here is invisible to the remote agent. Run git status first and tell the user if the tree is dirty or the branch is unpushed.

hdev submit plan.md                 # one VM per slice, Claude Code
hdev submit -a codex plan.md        # same, using Codex
hdev submit -1 plan.md              # whole file as one job
hdev submit -m "raise the upstream timeout to 30s"   # no plan file

Always name the job

Pass -b <short-name> on every submit. Without it, jobs are named from the first words of the task and become unreadable — hdev-agent-0814-1357-add-src-t tells you nothing when four are running. The name flows into the job name, the branch and the PR.

hdev submit -b epic473 plan.md      # → hdev-epic473-…, branch epic473/…

Use whatever the user already calls the work: a ticket id, an epic number, a feature name. Short, lowercase, no spaces. When you submit several slices at once give them one shared prefix so they read as a set. Tell the user the names you chose — they need them for hdev status, hdev ask and hdev logs.

Other flags: -t cpx32 for a bigger VM, -p <profile> to boot from a snapshot that already has the toolchain, -e <file> to send an untracked file.

Check hdev images before submitting. If the work needs a browser, submit with -p browser rather than letting the agent install Chromium on every job. If it needs Docker, use -p docker. Naming a profile that has not been built fails, so list them first.

submit returns as soon as the jobs start. Tell the user they can close the laptop, and give them the job names.

Then start the watch loop — every time, in the same message

A submitted job with nobody watching it is a VM that bills until somebody remembers. So do not stop at "here are the job names". Start the loop as part of the same response:

/loop 10m check my hdev jobs, review anything new, and close out what is done

Say you have started it, at what interval, and that it stops on its own once every job is reaped. If the user does not want it, they will say so — but the default is that a submit is always followed by a watch.

Use dynamic mode when the job length is unknown, because it wakes on the event rather than on a timer:

/loop check my hdev jobs and tell me when they finish

The tick procedure is in "Watching jobs and closing them out" below. The important part is that nothing else deletes these VMs. There is no server-side timeout and no auto-reap. If the loop is not running and the user walks away, the VM runs until someone notices.

4. Talk to the remote agent while it works

The remote agent runs as an orchestrator: it delegates to implementer, tester and reviewer subagents and keeps its own progress notes. You can reach it at any time.

hdev status <job>                    # the orchestrator's own notes, cheapest
hdev ask <job> "<question>"          # ask it, with its full context
hdev ask -c <job> "<instruction>"    # tell it something; it acts on this
hdev logs [-f] <job>                 # raw output, when the above is not enough

Reach for these in that order. hdev status costs nothing and usually answers "how is it going". hdev ask forks the job's conversation, so the remote agent answers with everything it knows and its own thread is untouched — safe to use while the job is running. hdev ask -c continues the real thread instead, so use it only to change what the agent is doing.

When the user asks how remote work is going, run hdev ps first, then hdev status on the job they care about. Quote the agent's own words; do not paraphrase progress you have not read.

5. Collect the result

hdev ps                # running / done / failed, per job
hdev ssh <job>         # get on the box, repo is at /work
hdev reap              # delete the VMs of finished jobs

A finished job has already pushed its branch and opened a PR. Review the PR, do not assume it is correct. hdev reap is what stops the VMs from billing — say so when reporting that jobs are done.

Choosing the agent

Four harnesses. Pick per job and say why.

hdev submit -b epic1 plan.md               # Claude Code (default)
hdev submit -a claude-pi -b epic1 plan.md  # Claude plans and reviews, pi writes
hdev submit -a pi -b epic1 plan.md         # pi alone
hdev submit -a codex -b epic1 plan.md      # Codex

hdev agent <name> saves a default so it need not be typed each time.

claude-pi is the interesting one. It is the fast-efficient split running remotely: the frontier model does the judgement, a cheap fast model does the typing, and the frontier model verifies. Measured on a real job — three helpers with tests — it made 11 pi invocations and 1 subagent call, and produced 10 of 10 passing tests in two minutes.

Use it when the work is well-specified enough to hand over but you still want real review. Use plain Claude when the brief is ambiguous and a plausible-but-wrong answer is expensive. Use plain pi for mechanical work where you do not need the frontier model at all.

pi on your Claude subscription

hdev model anthropic/claude-haiku-4-5-20251001 points pi at a Claude model, and hdev authenticates it with the subscription token rather than a metered API key. Verified working.

Flag this to the user rather than deciding for them. Anthropic documents that token as being for CI and scripts; whether driving a third-party client with it fits their subscription terms is a licensing question, not a technical one. Say so and let them choose.

A finished job is still a collaborator

done does not mean disposable. The VM stays up, the agent's session is intact, and the work tree is exactly as it left it. Until you reap, you can send it back for changes — and it still has all its context, which a fresh job never would.

So the lifecycle is not submit → done → reap. It is:

submit → done → review the PR → ask for changes → review again → reap

Reap last, not first. Once the VM is gone the agent is gone with it, and a follow-up means a new job that has to rediscover everything.

Sending work back

hdev ask <job>  "why did you skip the error path in send()?"   # question, safe
hdev ask -c <job> "add the missing error path and push again"  # instruction

-c continues the real conversation, so the agent acts: it edits, commits and pushes to the same branch, and the PR updates. That is the whole point — it is cheaper and better than opening a second job, because it remembers the reasoning behind what it wrote.

The agent's final message is a claim, not a result. Verify it yourself — this checklist is from fast-efficient, where every one of two measured runs had exactly one undeclared deviation:

1. gh pr view <n> --json files — did it touch only the files on the list?
2. gh pr diff <n> -- tests/ — empty? The agent must never edit a test.
3. Run the acceptance command. Compare against the baseline you recorded.
4. Run the type checker and linter. Cheap models skip formatting.
5. Run the wider suite for regressions.
6. Read the diff. For "copy this verbatim" work, compare line by line.
7. Re-read the contract clause by clause and confirm each one.

Known failure modes, all from the same source: it skips formatting; it deviates from the contract without saying so (one run re-exported eleven of twelve symbols because the twelfth would fail the linter — the call was right, the silence was the defect); and it writes locally-correct but fragile code. The pattern is that it optimises for the check you gave it and does not report the trade-offs it made.

Fix small defects with hdev ask -c. Send a large one back as a new slice.

One hazard, learned the hard way

-c injects an instruction into a working agent, and the agent may act on it in ways you did not intend. A real job died this way: an operator note prompted the agent to investigate what it thought were runaway processes, and it ran kill -TERM on its own pid. The job ended mid-work.

So: -c is for the work, not for the machine. Ask for code changes. Never ask an agent to inspect, clean up, or kill processes. hdev ask without -c and hdev status cannot change anything and are always safe.

Watching jobs and closing them out

Offer the user a loop that runs the whole cycle, not just a status poll:

/loop 10m check my hdev jobs, review anything new, and close out what is done

Each tick:

1. hdev ps — status, VM age, and idle: how long since anyone last spoke to

that agent.

1. Still running? Nothing to do. Say nothing if nothing changed.
2. Newly done? Read the PR diff. Say what landed and what is missing. If

the user wants changes, hdev ask -c and keep the job alive.

1. failed? hdev logs <job>. The VM stays up so the evidence survives.
2. Done, reviewed, no changes pending, and idle for a while? Only then

hdev reap. Tell the user which VMs you are deleting and that their agents go with them.

1. A job that says running but has not moved for a long time? It may be

stuck. hdev reap --idle <duration> deletes a job whose agent stopped writing files. Prefer it over --max-age: a job that is really working keeps writing, so idle cannot mistake slow honest work for a runaway. Confirm with the user before using it on a job they may still want.

1. A job showing unreachable? Its idle time cannot be measured, because

the SSH that would measure it is what failed. Usually the user changed network — the firewall only allows SSH from the IP held at submit time. Say that, and offer hdev reap --max-age <duration> as the way to clear it.

What "idle enough" means. Idle counts from the last interaction, so asking a question resets it. Do not reap a job the user is still talking to. Twenty minutes idle with the PR reviewed and nothing outstanding is a reasonable bar; when in doubt ask, because reaping is irreversible and keeping a VM costs about four cents an hour.

Stop the loop once every job is reaped. A loop ticking over an empty job list is pure noise.

The backstop: reap when the session ends

The watch loop stops when the session closes. The VMs do not. Install a hook so that the last thing a session does is reap.

hooks/session.sh ships with this skill. Offer to install it the first time you submit a job for a user, and add it to ~/.claude/settings.json:

"SessionEnd": [
  { "matcher": "*", "hooks": [
    { "type": "command", "timeout": 90,
      "command": "bash '~/.claude/skills/hetzner-dev/hooks/session.sh' end" } ] }
],
"SessionStart": [
  { "matcher": "*", "hooks": [
    { "type": "command", "timeout": 15,
      "command": "bash '~/.claude/skills/hetzner-dev/hooks/session.sh' start" } ] }
]

Write the full path — settings.json does not expand ~. Merge with the hooks that are already there. A user usually has some. Replacing the array deletes them.

The hook does not kill a running job. That is deliberate. A job is meant to outlive the session — that is the point of hdev. hdev reap deletes the VM of every job that finished, failed or vanished, and keeps every job that runs. The hook adds no rule of its own.

Two events, because they do different work:

SessionEnd has no terminal left to print to, so the reap output goes to ~/.config/hdev/last-reap.log. Read that file when you want to know what the hook deleted.

The hook exits immediately, and prints nothing, when hdev is absent or no job is tracked. Measured at 0.32 s with no jobs.

Set HDEVREAPIDLE=1h in the environment to make the end hook pass --idle too, so a stuck job is cleared as well as a finished one. It is opt-in by design: deleting a job that still reports as running is a bigger decision than a hook should make unasked. Offer it; do not set it for the user.

A hook is a backstop, not the plan. It runs when the user closes the session, which can be hours after a job finished. Reap in the watch loop as soon as the work is reviewed. Let the hook catch only what you missed.

Powering a VM off would not help. Hetzner bills the server object until it is deleted, so a VM cannot save money by shutting itself down — and a VM that shuts down goes unreachable, which plain reap keeps. Deletion has to come from the user's machine, because a Hetzner token is project-scoped and one on a job VM could delete every other job. If the user asks for self-shutdown, say this plainly rather than building it.

Interval guidance

Once jobs are submitted the user should not have to keep asking. For reference:

/loop 10m check my hdev jobs and tell me what changed

Dynamic mode is better when the job length is unknown, because it wakes on the event rather than on a timer:

/loop check my hdev jobs and tell me when they finish

What to do on each tick:

1. hdev ps — every job, its status, its VM age.
2. For any job whose status changed since the last tick, hdev status <job>

and summarise what moved.

1. Say nothing new when nothing changed. A tick that reports "still

running" for the third time is noise. Report the change, or stay quiet.

1. When every job has settled: give the PR links, say whether the branches were

pushed, and remind the user that hdev reap is what stops the billing. Then stop the loop — do not keep ticking over finished work.

Never call hdev ask on a tick. ps and status are free: one SSH round trip and a file read. ask is a model call on the remote box, and it gets slower as the job's context grows — measured at 4.6 s early in a job and 1 minute 1 second late in the same job. Use ask when the user actually has a question, not on a schedule.

Interval: most jobs finish in 2–15 minutes. 10m is a sensible default and 5m is a reasonable floor. Below that you are paying SSH round trips to learn nothing. A /loop runs only until the session closes; for anything longer the user wants /schedule.

Untracked files the VM will not have

hdev clones from GitHub, so anything untracked or gitignored — .env, .env.local, local certs, fixture data — is not on the VM. A suite that needs them will fail there and the agent will report itself blocked.

You can send them explicitly:

hdev submit -e .env.local -e .env.test plan.md

Paths are relative to the repo root, the flag repeats, and the files land in the work tree after the clone.

Sending is deliberate, never inferred. Ask every time.

1. Name the exact files, one per line, and say which suite needs each one.
2. Say what is in them if you know — "this holds your Stripe test key".
3. Wait for an explicit yes. A previous yes does not carry to the next submit.
4. Never add -e because a test failed. Never guess at .env from a filename.
5. Never print the contents of these files, to the user or into a brief.

These usually hold real credentials — database passwords, payment keys, production tokens — and the VM runs an agent with permissions fully open and a live network.

On the VM, every sent file is added to .git/info/exclude along with .env, .env., .pem and *.key. That is per-clone and never committed, so a sent secret cannot be staged by git add -A and end up in the PR — even if the repository's own .gitignore does not cover it.

If the user declines, that is a fine outcome: tell the agent in the brief which suites it cannot run, and have it report them as unverified rather than guessing or stubbing them out.

Two things that are already safe: the files travel over SSH after boot, never through cloud-init; and hdev snapshot scrubs the whole work tree before capturing, so a sent .env cannot end up baked into a profile image.

Make sure the job delegates to cheap agents

The point of the remote orchestrator is that it decides and its subagents work, on a cheaper model. hdev ships that configuration with every job:

Override with HDEVWORKERMODEL and HDEVREVIEWERMODEL. You do not need to tell the agent to use efficient-fable or to delegate — the skill and the subagents are already there.

Check it actually happened

hdev ps has a DELEG column: delegations made, and the share of output tokens that ran on the cheap model.

JOB                    STATUS   AGE   IDLE   DELEG
hdev-epic1-...-1       done     14m   3m     6/29%
hdev-epic2-...-1       done     11m   2m     0/0%

6/29% is healthy: it delegated six times and 29% of the output came from haiku. 0/0% means the orchestrator did everything itself on the expensive model — that is the failure to catch.

Measured across four real jobs, delegation counts were 6, 3, 1 and 0. It is not reliable on its own, so check rather than assume.

When a job shows 0 delegations

HDEV_STRICT=1 hdev submit -b epic1 plan.md

Strict mode removes Edit, Write and NotebookEdit from the orchestrator, so it cannot do the work itself and has to hand it to a subagent. Reach for it on anything large, and any time the user says usage is draining.

A one-file change legitimately shows 0/0% — delegating a one-line edit costs more than doing it. Judge against the size of the job.

Seeing what the jobs cost

hdev usage

Per-job output tokens read from each box's own transcript, plus this machine's current 5-hour block. Report the figure as API-equivalent — what those tokens would have cost on the API. On a subscription it is a size comparison, not a bill. Never call it a charge.

A job's usage record lives on its VM, so hdev reap would destroy it. reap captures the figure before deleting, into ~/.config/hdev/usage.tsv, and hdev usage shows those reaped jobs too.

hdev usage does not cover pi jobs. It reads Claude Code's transcript format, which pi does not write, so a pi job shows - rather than a number. That is missing data, not a zero — never report a pi job as having cost nothing. For pi spend, read the OpenRouter dashboard.

When a job hits the usage limit

Claude Code emits three different limit messages and they need different responses. The job script already handles this — do not try to work around it:

• Session limit (the 5-hour window) — the job sleeps until the window rolls

over, then resumes the same conversation rather than restarting, so no work is lost. Up to HDEVLIMITRETRIES times, default 2.

• Weekly limit — the job stops. Waiting would idle a billing VM for days.

Tell the user to resubmit after it resets.

• Opus limit — the job stops. Sleeping cannot clear a model-specific limit;

a different model would.

A waiting job reports waiting-on-limit in hdev ps, and hdev reap refuses to delete it. The VM keeps billing while it waits — say so when you report that a job is waiting, and give the user the option to cancel instead.

If the reset time cannot be determined, the job stops rather than sleeping blind. That is deliberate.

Failure handling

• hdev ps shows failed — read hdev logs <job>. The VM stays up so the

evidence survives. Fix the brief and submit a new job; do not try to resume the old one.

• No PR appeared but the job says done — the agent made no changes, or the

push worked and gh pr create did not. hdev logs <job> says which.

• unreachable — the firewall allows SSH only from the public IP you had at

submit time. On a new network, hdev submit anything to refresh the rule.

Turning a job's box into a reusable profile

When a project needs a toolchain no existing profile has, do not make every job install it. Set one box up, then capture it:

hdev submit -k -m "install <the toolchain> and prove each part works"
hdev snapshot <job> <profile-name>
hdev submit -p <profile-name> plan.md

-k keeps the VM after the job. hdev snapshot scrubs credentials and the work tree before capturing, and refuses while the job is still running.

Hetzner allows 30 snapshots across all projects, so retire profiles you no longer use rather than accumulating them.

Setup checks

If hdev itself is not found, see "Before anything else" at the top — the CLI is a separate install from this skill.

If hdev submit fails immediately:

• hcloud context active — needs a Hetzner API token. `hcloud context create

<name>` prompts for it; never ask the user to paste a token into the chat.

• gh auth status — needs repo scope; the remote agent pushes with it.
• hdev login status — shows whether subscription credentials are captured.

hdev login captures them; the remote agents then bill the subscription rather than the API.

• hdev image builds the base snapshot once. Without it every job installs the

toolchain at boot: about 3 minutes per VM instead of about 40 seconds (measured 39 s, n=1).

Do not set ANTHROPICAPIKEY if you want subscription billing — inside Claude Code it takes precedence over the subscription token. hdev drops it from the job environment when a subscription token exists.